I first read about this on a MacScripter posting asking about this, and then found this excellent tutorial at Guimkie. There are very few differences between my tutorial below and his, but in my own tutorial I have created somewhat more zoomed in screenshots and a bit more information on the creation of appcasts. You might also want to consult the documentation on the Sparkle homepage and the PDF that comes with the download.

1. First download the Sparkle module from its homepage. This tutorial uses Sparkle 1.1 and XCode 3.1.

2. Drag the Sparkle.framework into your XCode application into the folder “Linked Frameworks” of the “Frameworks” folder.

You should now see it in your linked frameworks folder.

Now, from the “Project” menu of XCode, choose “New Copy Files Build Phase” from the “New Build Phase” menu item.

A new window will appear looking like this:

Now, drag the Sparkle.framework from the “Linked Frameworks” folder and drop it onto the newly created “Copy Files” build phase listed under your application in the “Targets” section of your project.

Now in the Info.plist file of your project in XCode, you need to add a new key. This will designate a link to the RSS file you will eventually create, called an “AppCast” which will contain the information about updates to the application. For example:

SUFeedURL
http://foolsworkshop.com/downloads/sparklesample.xml

Now switch to the “Interface Builder” application and your “MainMenu.nib” file (open it from the “Resources” folder of your XCode project if it is not open.

From the File menu choose “Read Class Files”

Navigate to your folder and you should see the Sparkle.framework folder and inside that the “Headers” folder (or actually an alias to the folder, which is deep in the “Versions” folder). Select all the files in the “Headers” folder and add them.

Once you have added the class header files from Sparkle, add an “NSObject” which looks like a blue box from the library panel into the list of files in your MainMenu.nib.

Click on this object and in the “Information” tab looking like a white “I” on a blue circle, type “SUUpdater” into the “Class” field (it should auto complete if you read the class files correctly) and press enter. This will add the required Class Actions in the panel below it.

Now create your “Check for Updates…” menu item in the application menu by dragging an NSMenuItem into the appropriate place. After you add it, you can change the “Title” of your menu in the inspector in the first tab.

Now, you need to connect this menu to the new Sparkle object you created. Control-click on the menu item and a blue line will appear. Drag this line and drop it on the “Updater” object.

See Max Karreth’s tutorial for a bit more on how to add a preference for automatic checks for updates.

Everything you need to do in the project is set up. However, you still need to set up an AppCast RSS file. There is a sample of one in the Sparkle documentation PDF and also you can download the test file used found in the Demo application. I created my AppCast RSS file using the RSS application Feeder which actually has a template for creating Sparkle RSS files (if you use this, consider editing the template and turning on the extra field for “Release info”). The important things that must be included in your AppCast RSS feed are a link to the Sparkle namespace:

xmlns:sparkle="http://www.andymatuschak.org/xml-namespaces/sparkle"

You then add a new RSS item each time you make a new update, and include an enclosure linking to your new release, which the documentation says should be named something like “Application Name App_2.0.zip”

Here is what my RSS feed looks like after I created it with the Sparkle template in Feeder. Some of these things are optional lines or extra information added by Feeder itself, but it should give you an idea of how this works:

http://foolsworkshop.com/downloads/sparklesample.xml
    A simple example AppCast for Sparkle
    Feeder 1.5.3(378) http://reinventedsoftware.com/feeder/
    http://blogs.law.harvard.edu/tech/rss
    en
Fri, 30 May 2008 11:35:15 +0900
    Fri, 30 May 2008 11:35:15 +0900

Sun, 01 Jun 2008 11:24:54 +0900

      version-20-no-useful-changes-upgrade-for-$100
      http://foolsworkshop.com/downloads/sparklesample.html

In addition to the RSS file, you might also want to post some release notes on the new version, which you can see in the above RSS is linked with the “sparkle:releaseNotesLink” tag. If such a file exists, Sparkle will display this file, which is regular HTML, when a new update is found.

You can try all this and play with a sample application here:

Sparkle Sample Project

Note: Max Karreth has already been nice enough to create a similar sample application but I had some trouble running the application.

Building this application and running should give you a chance to see how Sparkle works, as I have posted a “fake” 2.0 update. Note that the built application is labelled as “2.0” in the Finder if you choose “Get Info” after downloading the update.

1) To post relatively short but lucid explanations of how to solve practical problems a developer might face in creating an AppleScript Studio application, especially if one is a beginner and not that familiar with XCode, Cocoa classes, or even the AppleScript language.

2) Whenever possible, these explanations should be accompanied by a snippet of well-commented sample code, and if the posting author’s time allows, a sample XCode project which demonstrates the solution.

3) Whenever possible, links to forum/list postings, tutorials, Apple documentation, etc. which provide the same/similar or completely different solutions to similar problems should be provided so there are other sources the beginner can turn to if they need more information.

4) Any original content created for postings be Creative Commons
licensed so it may be shared and spread easily among interested parties.

I have not been able to find any way accomplish this task in AppleScript. Philip Buckley’s solution uses the Cocoa method “editColumn:row:withEvent:select:” and the “call method” command to get at it (see this earlier posting for more on this)

This method takes four parameters, as his email outlines:

the column index — NB this is zero-based, so first column is 0, second column is 1 etc

the row index – NB this is zero-based, so first row is 0, second row is 1 etc

an NSEvent — should be nil I think, but for this purpose it seems it will accept pretty much anything, so in the example below, which I have tested, I have pased 0

a boolean — 1 for true

I created a sample XCode Project which implements his solution for others to play with. You can download it here:

First Responder in Table Cell

The project creates a data source for the main window’s table, fills it with some text in 10 rows, and then provides a button which, when clicked, will select the column and row indicated by the user in two separate text fields.

The key code for the button is below:

set theWindow to main window
set theRow to (the contents of text field "selectRow" of theWindow) - 1
(* I subtract one because the parameters in the Cocoa method used below is a 0-based index *)
set theColumn to (the contents of text field "selectColumn" of theWindow) - 1
(* I subtract one because the parameters in the Cocoa method used below is a 0-based index *)
set theTable to table view 1 of scroll view 1 of theWindow
set first responder of theWindow to theTable
(* If you want the row to also be selected, uncomment the next line *)
(* set selected row of theTable to (theRow + 1) *)
call method "editColumn:row:withEvent:select:" of object theTable with parameters {theColumn, theRow, 0, 1}
(* This example does not error check to see if the inputted row 
and column numbers are greater than the total number of rows/columns *)

Many thanks to Philip Buckley who responded to my posting about this problem.

set the first responder of myWindow to text field "secondField" of myWindow

You can download a very simple sample application which shows you how you can respond to the “return” key to move to the next text field. It also has some code to show you a button that, when pressed, will move the first responder to the second field on the screen.

Download the sample XCode project here: First Responder Example

Here is are the key lines of code involved:

on clicked theObject
	if the name of theObject is "switchField" then
		set myWindow to the window of theObject
		set the first responder of myWindow ¬
           to text field "secondField" of myWindow
	end if
end clicked

on keyboard up theObject event theEvent
	set myWindow to the window of theObject
	if the name of theObject is "firstField" then
		if the character of theEvent is return then
			set the first responder of myWindow to ¬
                text field "secondField" of myWindow
		end if
	else if the name of theObject is "secondField" then
		if the character of theEvent is return then
			set the first responder of myWindow to ¬
                 text field "firstField" of myWindow
		end if
	end if
end keyboard up

2. Each file must have an additional META tag added inside the HEAD tag near the top of your HTML files with the title of your application and “Help”:

3. After you have finished making all your help files, open the application “Help Indexer” found in your Developer/Utilities folder. Navigate and choose the folder containing all your HTML, CSS, and images. This will create an “index” for your help files which can be used to search your files in the help browser.

4. Back in XCode, right-click on your “Resources” folder on the left and choose Add – “Existing Files…” choosing your folder with the help files and the newly created index. When you are given some more options, this seems to work for me:

This should result in the files being added to your project, looking something like this:

You then need to add two keys to your “Info.plist” plist file, one indicating the name of your application’s help book, and the other the name of your help folder. In my example, here is what I needed to add:

CFBundleHelpBookName
Help Book Example Help
CFBundleHelpBookFolder
Help Book Example Help

5. Finally, you probably want to change the “Title” of the help menu item in “Interface Builder” to something like “Help Book Example Help” (in my case) so that it doesn’t say “NewApplication Help” when it is run. You can find the help menu item in the “1” menu under “2”

Now try compiling and running your application and the help book’s index.html home page should appear. My biggest complaint with the Help Book browser in OS X is that even simple files seem to load relatively slow; slower than running files directly in Safari for example. I am often reluctant to read help files since the help book takes one or two seconds longer to load than I am willing to wait for an answer. In the same time I can google a question online rather than risk the possibility that the help files are sorely lacking in documentation.

You can download the sample XCode project demonstrating the above here: Help Book Example

In order to write this posting and learn the techniques described here, I depended on these useful websites: a MacScripter posting on the topic and this excellent tutorial in French (I just looked at the pictures and guessed what I could from the accompanying text but the author recommends using Google to translate the site).

Activate the “keyboard up” handler for the text field you wish to detect keyboard entries for and add some code.

When a key is pressed, a numerical Apple “key code” is generated that can be accessed by AppleScript. However, according to AppleScript Studio documentation:

KEY CODE: the hardware-dependent value of the key pressed; you aren’t likely to work with the key code and no constants are currently provided to specify key codes; however, you may want to experiment with possible values; (for example, for at least one keyboard, the key code for delete is 51 and for backspace is 117)

This is not very reassuring and I don’t know how standard the numbers are from keyboard to keyboard.

You can also access the “character” of the keyboard event which is just the literal character. Check the AppleScript document for other properties of the “event” class that may be useful to you, including booleans (true/false values) for things like: “command key down” “option key down” and “shift key down.”

Here is some code that will detect many of the possible keys typed into an input field and then show which numeric Apple key code corresponds to that key.

on keyboard up theObject event theEvent
	if the name of theObject is "inputField" then
		(* Is this the input field we are typing in?  *)
		set theKeyPressed to (key code of theEvent)
		(* Save the key code into a variable *)
		set theCharacterTyped to (character of theEvent)
		(* Save the character that was typed *)
		if theCharacterTyped is return then set theCharacterTyped to "RET"
		(* The return key doesn't show up nicely in the result, so let's
                replace it with "RET" *)
		
		if theKeyPressed is not 76 then
			(* 76 is the Apple key code for the "Enter" key 
                        - at least on my keyboard *)
			set the contents of text field "showResult" of window "sampleWindow" to ¬
				theCharacterTyped & "=" & theKeyPressed
			return false
			(* Returning false will allow the typing to continue without disruption *)
		else
			(* The "Enter" key was pressed *)
			display dialog "You pressed the enter key, I think."
			return false
		end if
	end if
end keyboard up

After checking to see if the user is typing into the input field (which they obviously are in a window that has only one text field receiving this handler), the key code and character of the event are put into a variable for later use (some will simply refer to this directly rather than putting it into a variable first). It then checks to see if the character typed is the return key and changes the variable to “RET” so it will show up easier in the output. The code then checks to see if the enter key was pressed (on my keyboard at least) and if not, displays the character pressed, an equals sign, and the corresponding key code. If it thinks the enter key was pressed (if your keyboard also has 76 set to “enter”) then it will display a dialog to that effect. Returning false allows the user to type undisturbed by the events. Set this to “true”, if you like, in order to see what happens to the typed text.

You can download the sample code to try this out here: Keyboard Input Sample

In the case of my own application, I’m looking for the user to press the “return” (key code 36 on my keyboard) or “enter” keys (key code 76) and if this is caught, I will “set the first responder” (see upcoming posting) to the next field I want the user to type into, as if they had pressed the “tab” key.

When you want to write some code for a button press, a menu selection, respond to a keyboard event, etc. in Interface Builder you must explicitly lay out your intentions by activating the event handler in question. For example, if you want to do something in response to the user pressing a key in a text field (see next posting), then:

1. Click on the text field in Interface Builder.
2. Open the AppleScript tab of the inspector.
3. It is good practice to give your object a name here, which can be used to refer to the object in your script.
4. Choose your applescript that you want to attach to this object in the “Script” pop-up menu here.
5. Activate the check mark next to “keyboard up” in the “Key” section of the “Event Handlers” pane.

Forgetting to give an object a name, forgetting to assign it to a script and activate the correct event handler are common mistakes I have made that prevented me from getting any results.

A handy shortcut: You can directly jump to the empty method created by activating the handler by double-clicking the relevant handler.

If, for example, you wanted to use the existing Cocoa method to make a string all uppercase you could write code for a button that contains something like this:

on clicked theObject
	if the name of theObject is "makeUppercase" then
		set contents of text field "inputField" of window "myWindow" to call method "uppercaseString" of (contents of text field "inputField" of window "myWindow")
	end if
end clicked

If, instead, you wanted to have a string only capitalize the first letter of each word, then you would use the Cocoa function “capitalizedString” instead.

set contents of text field "inputField" of window "myWindow" to call method "capitalizedString" of (contents of text field "inputField" of window "myWindow")

You can download an example project with this example here: Call Method Example.

A full list of the Cocoa methods for the NSString class in Cocoa can be found in Apple document NSString Class Reference. Some of these methods need to be handled differently as they may require parameters etc. There is more detail on the call method command in the AppleScript Studio documentation to be found where you can learn more about how to include parameters.

Strings are only a simple beginning, this command opens up a lot of possibilities for using Cocoa methods that may not have equivalents in AppleScript, if done with care.

on replaceText(find, replace, subject)
	set prevTIDs to text item delimiters of AppleScript
	set text item delimiters of AppleScript to find
	set subject to text items of subject
	
	set text item delimiters of AppleScript to replace
	set subject to "" & subject
	set text item delimiters of AppleScript to prevTIDs
	
	return subject
end replaceText

get replaceText("Windows", "the Mac OS", "I love Windows and I will always love Windows and I have always loved Windows.")

Mr. Phillips has over 2500 postings at MacScripter and one can learn a lot from browsing through them to see the various solutions he has proposed to people’s problems.

Here is a piece of advice he offers after he explains the complexities of scope for properties, global, and local variables in chapter 10:

The ideal way to manage scope, in my view, would be to declare everything. If you need a variable to be visible in this scope and deeper scopes, then declare a property. (In a handler, merely declaring a local will do.) Otherwise, declare a local. Use global declarations sparingly, only for special occasions when separate regions of scope need shared access to a value. If you follow these rules, then any undeclared variable must be a free variable (see the next section). Thus you always know what everything is. Unfortunately, as I’ve said, AppleScript doesn’t help, so you can’t easily and reliably follow these rules, even if you want to. (( Quote from section 10.7 ))

I’m hoping that FaceSpan 5 will bring back the dream, greatly surpass the failures of alternatives like SuperCard, Revolution, overcome some of the problems of pure AppleScript and avoid the complexities of AppleScript Studio. And…is this asking for too much?…I hope the price will be reasonable.

Read more about the development of FaceSpan 5, which is currently in alpha, on their official blog. I’m just a little concerned that the last posting was in September of 2007, as of this posting.

The Facespan mailing list offers a bit more news.

After some users asked for an update, the developer, Mark Alldritt, responded

The simple answer is that I massively underestimated the effort needed to turn FaceSpan into the product I want it to be. This has impacted all of my other work as FaceSpan 5 has expanded to consume almost all my resources and delayed the release of other products (Script Debugger 4.5, Affrus 2).

This said, the FaceSpan 5 is progressing. The FaceSpan IDE now includes Script Debugger’s AppleScript editing and debugging. This means that you can single step through the code in your project and manage breakpoints directly within the IDE. Script Debugger’s dictionary windows, including the Explorer, are also fully integrated into the FaceSpan IDE.

…

There are still some key missing features (eg. tables, outlines) which I want to implement before opening the testing program to the public. However, if you want to begin using FaceSpan 5 in its current form, you can join the private Alpha testing program by emailing me privately.

It is sad that this looks like a one man show.

I would love to really get good at languages like Python and Ruby, especially after a few years of playing with a muddy language like PHP. However, I just haven’t ever gotten around to it.

A number of sites I have come across mention rb-appscript. This will allow you to write Ruby scripts that can script applications normally only scriptable by AppleScript. While I haven’t tried it and it doesn’t seem to be too useful for AppleScript Studio, it may be worth a look for people who are frustrated by the limitations of AppleScript and want the power and beauty of Ruby.

The homepage can be found here:

rb-appscript

Here is information on how to install it. If you have the developer tools installed, this may amount to nothing more than the command:

sudo gem install rb-appscript

If you want a solution to help you use Ruby for developing Cocoa applications, there is something called Ruby Cocoa, which provides a bridge to Cocoa. I’m reluctant to go out and learn Ruby only to find that the frustrations I already have with an official Apple supported environment like AppleScript Studio in XCode might be compounded when working through this kind of bridge environment. If Ruby Cocoa continues to mature and grow wider in support, I may eventually jump the AppleScript wagon and study the Ruby Way.

Apple’s Mailing List for AppleScript Studio:

AppleScript-Studio Home
AppleScript-Studio Archives

It is also great to see interesting interventions from people such as the author Matt Neuburg and many other experienced scripters that I have seen replying with some of the best posts at MacScripter.

on clicked theObject
    if the name of theObject is "doMenuItem" then
	   tell menu item "menuItemName" of menu "menuFile" of main menu to perform action
    end if
end clicked

/Developer/Examples/AppleScript Studio/Simple Toolbar

For Leopard users who don’t mind building applications that require OS X 10.5 or higher, you can now create toolbars directly in Interface Builder with the NSToolbar class.

Add the class to your window, and you will get a series of default buttons. You can add buttons to the toolbar by adding NSToolbarItem (the item to the right with the “?” image in it) and can add images for the toolbar via a popup menu in the inspector.

The Simple Toolbar sample scripts controlled the toolbar buttons through the “clicked toolbar item” handler of the window containing the toolbar, which confused me when I tried to use NSToolbar without generating the toolbar directly in the applescript. After much frustration, I discovered that the toolbar buttons were scripted through the “clicked” handler as any other button in the window might be. There appears to be no need to necessarily use “clicked toolbar item” at all.

UPDATE: I posted to MacScripter on a problem I had with buttons that are added or re-added when the toolbar is customized: NSToolbar error when customizing the toolbar

UPDATE: Another MacSripter posting by regulus6633 points to problems using the new toolbar. Apparently there are problems when referring to any non-button objects on the toolbar (such as pop-up menu or a search field). My own tinkering confirms this.

offset of "needle" in haystack

will return the start position of “needle” and if it doesn’t find needle at all, will return 0.

repeat
   -- code
end repeat

this will repeat indefinitely but you can exit the repeat within such a block by adding something like this:

if stopMe = true then
   exit repeat
end if

You can also repeat a fixed number of times:

repeat 5 times
   -- code
end repeat

You can also repeat until some condition:

repeat while keepGoing = true
   -- code
end repeat

repeat until stopMe = true
   -- code
end repeat

Finally there is a kind of repeat which is familiar to anyone who has used increments in for loops in other programming languages:

repeat with x from 1 to 10
   -- code which can refer to the number x which increases with each repeat
end repeat

on choose menu item theObject
	if the name of theObject is "myMenuItem" then
		display dialog "You chose my new menu item."
	end if
end choose menu item

Then go back to your script and you can begin scripting the button in XCode. For example:

on clicked theObject
	if the name of theObject is "myButton" then
		display dialog "You pushed a button."
	end if
end clicked

set contents of text field "myTextField" of window "myWindow" to "Hello, World."

Make sure the “name” (not the “title”) of your target object (in this case “myTextField”) is correct in your NIB file in Interface Builder.